Park Home Repairs in Dartford

Park homes need a different approach from conventional brick houses. Roofs are often flat or low-pitched, exterior panels have joints and seals that can let water in, and a small leak can travel before it appears inside. Treating the damp patch without finding the entry point rarely solves the problem.

I repair park homes across Kent, from isolated roof leaks to worn exterior seals, damaged panels, and failing roofline components. The first job is always to inspect carefully. I check the roof covering, edges, flashings, joints, gutters, fascias, soffits, and visible exterior seals so I can work out where water is actually getting in.

Roof problems are common on older park homes. Felt, sheeted, and other flat or low-pitch systems can split, lift at the edges, or fail around vents and joins. Sometimes a local repair is enough. Sometimes the covering has deteriorated too far for another patch to be sensible. I'll show you what I find and explain the practical options before recommending any work.

Fascias, soffits, and gutters matter just as much. A leaking joint or blocked outlet can keep the edge of a park home wet, damaging boards and allowing water behind the exterior finish. I repair and replace damaged sections, clear drainage runs, and make sure rainwater is being carried away properly.

I also deal with exterior panels, trims, joints, and seals. Sealant does not last forever. Once it shrinks, cracks, or pulls away, wind-driven rain can get behind the surface. The right repair means removing failed material, preparing the joint, and resealing it properly, not smearing fresh sealant over dirt and old loose edges.

Park homes can have lightweight construction and finishes that need careful handling. I won't start pulling things apart based on a guess. You'll get a clear explanation of the problem, photographs where useful, and a fixed quote before work begins. If the inspection uncovers something different, I'll speak to you before doing any extra work.